|
|
UH-1H V2.0 !
Here i come with a new UH-1H Helios profile!
We already have a UH-1H Helios profile, we really need a new one?
Well, several reasons made me create this new one:
1- At the moment Helios don't have a UH1H interface, so when i made the first profile in 2016, i was forced to use the old FC interface.
2- For the outputs i used a largue keyboard default file, and then use the key commands to send the switch clicks to DCS. And every time ED made changes on those files, we can have problems.
3- Using the keyboard to send the commands, force to create diferent version of the profile for diferent international keyboards, making the creation of a profile a real pain.
4- After 3 years of changes on DCS, several controls of the profile stop working anymore, so we really need a revision of the entire profile.
Some months ago, i created a new general purpose interface for Helios.
Now i can create profiles using this interface, giving all the functionallity, inputs and outputs, to all the airplanes we need even if they don't got a interface. Whith it i remade the new MI-8 profile, and now is time for the UH-1H.
So i start redesigning all the art for the diferent panels, removing all the keyboards commands, so no more default.lua needed and adding new instruments for the copilot and ram temperature.
I replaced aswell some of the old instruments for others more eficients, using the new controls implemented on the latest versions of Helios.
And finally, i use my new Kneeboard control in Helios editor to create a new NAV panel, a Kneeboard with all the airport charts from all the actual DCS maps! including my Normandy Aerodrome charts v1.0 package.
So.... Here you got it... The new UH-1H V2.0 profile !!
- HELIOS VERSION NEEDED:
Important notice !!
This new profile uses the new UH-1H Helios interface, so you need to have the Helios version 1.4.2019.0616 or above
You can donwload from here:
Main panel Pilot, military version
Main panel Copilot
Main panel Pilot, civil version
Pedestal 1 panel
Pedestal 2 panel
Overhead panel
Brakers panel
New Kneeboard Nav panel
PROFILE FILES:
UH-1H_v2.0.hpf .....................16:10 monitor resolutions
UH-1H_v2.0b.hpf .....................16:9 monitor resolutions
- EXPORT FILES:
Another important notice !!
Included in the Scripts folder, you can find the export.lua, and a Helios folder with the export files needed to run with this profile
You need to install those files in your scripts folder.
- Monitor aspect resolutions:
I made two different profiles, v1.0 for 16:10 monitors and v1.0b for 16:9 monitors. Use the one better fit width you monitor resolution.
- THANKS:
I made the entire graphic art, based on screenshots of the simulator, and the textures folder of the game.
I used the airport charts from http://www.virtual-jabog32.de
I used the Persian Gulf Kneeboard pages by Pellelil - https://www.digitalcombatsimulator.com/en/files/3303320/
I used the Nevada/Arizona Airports diagrams V2.3 - http://www.476vfightergroup.com
I used the DCS Normandy Aerodrome Charts V1.0 by Capt Zeen - http://www.captzeen.com
For the export.lua i used the Loophole version, compatible width UH-1H, A10c and FC3 as a base for all my implementations.
In the export files i include a couple of functions by [FSF]Ian to export the digits of the UV26 for the MI-8
I want to give thanks to Bluefinbima, for let me include the new interface and all the new helios controls.
Thanks to Rashmaninov, for implementing the new helios Trans-rotate control.¡Gracias amigo!
Thanks to Cylution, yzfanimal, Damien022, Derammo, and Piet Van Nes for the good work done implementing new Helios features.
And of course to Gadroc for creating Helios, this great software.
PROFILE FEATURES
- Pilot Dashboard:
All the instruments, lamps and switches implemented.
Can be switched between military and civil version on the prefs button
- Copilot Dashboard
All the instruments, lamps and switches implemented.
Can be switched between military and civil version on the prefs button
- Pedestal panel:
All the instruments, switches and lamps.
All the radio panels, full working !.
- Overhead panel:
All the instruments, switches and lamps.
- Overhead Breakers panel:
Complete breakers panel switches.
- Electric Breakers panel:
Complete breakers panel switches.
- Collective:
Complete collective width all the switches, buttons, and throtle.
- Prefs panel:
here you can switch between military and civil version, and several backgounds for outside views.
- Navigation panel:
Aerodromes and visual operation chart v 4.0.3 - http://www.virtual-jabog32.de
Persian Gulf Kneeboard pages by Pellelil - https://www.digitalcombatsimulator.com/en/files/3303320/
Nevada/Arizona Airports diagrams V2.3 - http://www.476vfightergroup.com
DCS Normandy Aerodrome Charts V1.0 by Capt Zeen - http://www.captzeen.com
Custom panel - for user custom images, replace the ones in : Documents\Helios\Images\Capt_Zeen\Kneeboards\custom using the same name of the images
- About panel:
Info about the profile and version.
INSTALLATION
- Install Helios if you don't have it yet.
- Copy the folder Helios from the package to your_user/my documents folder. There is where Helios store all the images and profiles
- If you got the UH1H old version, a replace message can appear, just replace all.
- Run the HeliosProfileEditor, load the profile UH-1HV2.0 or UH-1HV2.0b, and perform a Reset Monitors from the menu Profile.
- Save the profile using your custom name
- IF you use Tackview, Simpleradio, DCS-bios or another external scripts, copy the corresponding lines from your old export.lua to the new one.
- Install the export files
RUNNING THE PROFILE
-Open the Helios Control Center, select the profile and start it.
|
|
If you like my work and want to contribute, feel free to donate...
Join the Discord server for support:
|
